Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Audi A5 and S5.

Model: Audi A5 8T8, 8T, 8T3, 8F - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

In this guide, we will see the instructions that will allow us to disassemble and replace the xenon bulb of the front headlight of the Audi A5 and S5. First, let's open the hood of the vehicle and start removing the plastic protective cap located behind the headlight; then, let's disconnect the electrical connector of the xenon bulb to remove it, as shown in the video.

At this point, we will install the new low beam bulb, of the correct type and with the same power; let's check its operation after connecting it, finally securing the plastic cap.


Posted on 17 January 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on the Audi A5
How to Replace the Front Headlamp Bulb on the Audi A5
Audi A5 (2007-2016 / 8T8, 8T, 8T3, 8F) Today, we will provide the information needed to remove and replace the front headlamp bulb on the Audi A5. First, open the bonnet of the vehicle and…
Replacing the Headlight Bulb on an Audi A5
Replacing the Headlight Bulb on an Audi A5
Audi A5 (2007-2016 / 8T8, 8T, 8T3, 8F) The following steps show how to remove and replace the headlight bulb on an Audi A5. First, open the bonnet of the vehicle and start by removing the …
How to Replace the Front Headlamp Glass on an Audi A5?
How to Replace the Front Headlamp Glass on an Audi A5?
Audi A5 (2007-2016 / 8T8, 8T, 8T3, 8F) To replace the front headlamp glass on an Audi A5, first loosen the screws that secure the headlight unit to its housing, allowing it to be removed w…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos