Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Position Lights on an Audi A5

Model: Audi A5 8T8, 8T, 8T3, 8F - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Light bulb

See other generations:
Video tutorial

In today's video, you will see how to remove and replace the position lights on an Audi A5. First, open the bonnet and remove the upper plastic cover by unscrewing the Torx screws. Once done, unscrew the upper screws of the headlamp that hold it in place: remove the electrical connector and detach the headlamp from the car. At this point, remove the protective cap on the back of the headlamp by releasing the metal tab, and then remove the position bulb or, if you wish, all the other bulbs.

Replace them and then reassemble everything!


Updated on 22 March 2026 by ScegliAuto


Related tutorials

How to Remove the Airbag from an Audi
How to Remove the Airbag from an Audi
Audi A5 (2007-2016 / 8T8, 8T, 8T3, 8F) Removing the steering wheel airbag from an Audi A5 follows the same procedure used on Audi models such as the A1, A3, Q3, and Q5. To remove the steer…
Fuse Assignment for an Audi A5
Fuse Assignment for an Audi A5
Audi A5 (2007-2016 / 8T8, 8T, 8T3, 8F) Today, we will see, through this very useful video guide, the position of the fuse boxes in an Audi A5, first generation model. In addition to the fu…
Where Are the Fuses Located on the Audi A5?
Where Are the Fuses Located on the Audi A5?
Audi A5 (2007-2016 / 8T8, 8T, 8T3, 8F) The fuses on the Audi A5 are located inside the designated fuse boxes installed in the vehicle: in this type of vehicle, you will find two boxes for …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos