Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Inner Rear Light on an Audi A3 Sportback

Model: Audi A3 Sportback MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

To replace the inner rear light on an Audi A3 Sportback, start by opening the boot. Using a plastic tool, remove the internal cover from the boot panel, disconnect the connector, and with a socket, undo the three nuts that hold the light from the inside.

Close the boot and remove the light. After taking out the old light, detach the bulb holder by manipulating the clips and install it onto the new light.

Once the bulb holder is fitted onto the new light, clean the light housing and position the light. After positioning the light, open the boot, tighten the three nuts, reconnect the connector, and reposition the plastic cover of the boot panel.

Finally, test the operation of the new light.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How do you disassemble the headlight of the Audi A3 Sportback?
How do you disassemble the headlight of the Audi A3 Sportback?
Audi A3 Sportback (2003-2013 / MK 2) The disassembly of the headlight of a vehicle, in this case the Audi A3 Sportback, occurs for several reasons: cleaning of the opaque glass, replacem…
How do you replace the clutch of the Audi A3 Sportback?
How do you replace the clutch of the Audi A3 Sportback?
Audi A3 Sportback (2012-2019 / MK 3) In order to replace the clutch of the Audi A3 Sportback, you need to lift the car with a jack or a lift, so that the front wheels are not in contact …
How to Replace the Key Battery in an Audi A3 Sportback
How to Replace the Key Battery in an Audi A3 Sportback
Audi A3 Sportback (2012-2019 / MK 3) Replacing the remote battery in an Audi A3 Sportback is a straightforward task; here’s how to do it. Remove the plastic cover under the Audi logo by …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos