Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Quickly Remove the Air Vents

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Air vents

See other generations:
Video tutorial

There are several reasons why you may need to remove the air vents, such as replacing the frame with a coloured one, or because the mechanism that allows them to move gets stuck after being idle for a long time, and forcing it can cause damage. Removing the air vents in the cabin is a relatively simple task, but it requires care to avoid damaging the dashboard.

To extract the vent assembly, pull it towards you using your hands, or initially assist yourself with a flat-head screwdriver by prying at the edges to separate it from the rest of the dashboard. It is advisable to be cautious and place a spacer between the screwdriver and the plastics to prevent scratching the dashboard or the vent itself.


Updated on 31 January 2026 by ScegliAuto


Related tutorials

How to Remove the Air Vents on an Audi A3
How to Remove the Air Vents on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Learn how to remove the air vents (side dashboard) on an Audi A3. Use multiple levers to remove the vents. Pry at the top and bottom with the levers …
How to Remove the Air Vents of an Audi A3
How to Remove the Air Vents of an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Before you can begin, sit in the driver's seat of your Audi A3. Start by unfastening the internal clips that secure the air vents to the centre conso…
How to Remove the Air Vent in an Audi A3
How to Remove the Air Vent in an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) This short video shows you how to easily remove the air vents in an Audi A3, whether they are central or side vents. All you need is the appropriate …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos