Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper of Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Rear bumper

Remove the damaged A3 bumper? Let's see how it disassembles from behind the rear of the car. We open the tailgate, unscrew the locking pins located in the rear part of the lights (after removing the inspection caps), remove them after disconnecting the power supply terminals. We unscrew the screws located in the lower part of the bumper, then, we remove the stone guards of the car. We unscrew the screws on the inside of the trunk. Once the bumper is free from any screw or pin, take it with your hands and pull it away from the body (disconnect any power cables). We mount a new bumper on the car.

Posted on 19 October 2020 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the rear bumper of the Audi A3
Disassembly of the rear bumper of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Today's instructions will show us how to disassemble and replace the rear bumper of the Audi A3, following these simple steps. First, let's move to t…
How to remove the rear bumper of the Audi A3
How to remove the rear bumper of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Below we will see the main instructions that will allow us to disassemble and replace the rear bumper of the Audi A3. First, we open the rear hatch o…
Removing the rear bumper Audi A3
Removing the rear bumper Audi A3
Audi A3 (1996-2003 / MK 1, 8L) Do we want to replace the rear bumper of the Audi A3? Let's see how the rear bumper piece is removed once the tailgate is lifted. We unscrew and tigh…

Other guides you may be interested in

How to Replace Shock Absorbers on Opel Zafira 2008

When driving, your shock absorbers are always under stress. After covering many miles, you may notice that the ride is no longer as safe and smooth as it once was. Don't worry, you only need a bit of experience to replace them. Obtain the new part with or without the spring already fitted. If you want to replace the spring, seek help from an expert. Lift the vehicle and remove the wheel, disconnect the electrical connector and the brake line. Unscrew the bolts above the brakes and also the one at the base of the spring. Open the bonnet and remove the wipers. Create space to access the nut above the shock absorber, unscrew it while holding the part to be replaced to prevent it from falling. Refit everything, and repeat on the other side.

Watch the video!


by ScegliAuto

More videos