Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper of the Audi Q3

Model: Audi A3 MK 4, 8Y - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Rear bumper

See other generations:
Video tutorial

In this video, we see how to remove the rear bumper of an Audi A3 E-tron: we open the trunk and remove the side covers, then using a plastic spatula, we remove the rear lights by disconnecting the electrical connectors. After that, we remove the pin that holds the bumper, and use the spatula to remove the wheel arch trim.

We repeat the process on the other side. We remove the screws from both wheel arches and now we can pull down the rear bumper.

We remove the plastic trim from the rear tailgate, which allows us to remove the six screws holding the rear bar with the reflectors, which is part of the bumper.


Posted on 28 March 2025 by ScegliAuto


Related tutorials

How to remove the rear bumper of the Audi A3
How to remove the rear bumper of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Below we will see the main instructions that will allow us to disassemble and replace the rear bumper of the Audi A3. First, we open the rear hatch o…
How to Remove the Rear Bumper on an Audi A3
How to Remove the Rear Bumper on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) To remove the rear bumper on an Audi A3, first, use a screwdriver or battery-powered drill to unscrew the securing bolts located at the rear of the l…
How to Remove the Rear Bumper of the Audi A3
How to Remove the Rear Bumper of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Here are the instructions to remove and replace the rear bumper of the Audi A3 in simple steps. First, open the boot and start unscrewing the fixing …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos