Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : How to remove the rear bumper of an Audi A3

Audi A3 - Video tutorial

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Front bumper
Operation: How to remove the rear bumper of an Audi A3

How to remove the rear bumper of an Audi A3? Let's see together how to proceed with the disassembly: first of all with a screwdriver or cordless screwdriver unscrew the locking pins located in the rear part of the lights, remove them after disconnecting the power supply terminals. Unscrew the screws located in the lower part of the bumper, then remove the screws placed on the sides of the car's stone guards; Once the bumper is free from any screws or pins, take it with your hands and pull it away from the body and disconnect any power cables. We reassemble the new bumper.


Posted on 1 November 2023 by ScegliAuto

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos