Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : How to remove the handle of an Audi A3

Audi A3 - Video tutorial

Model: Audi A3 MK 3, 8V - Years 2012-2019
Part: Handle
Operation: How to remove the handle of an Audi A3

The procedure for disassembling the handle in an Audi A3 is quite simple, in fact it will be enough for us to have only a 90Â ° hex key in order to use it as a sort of hook. To start, open the door from which we want to remove the handle and remove the rubber cover, located at handle height, which covers the hole we need to access. Inside we will notice a plastic support divided in half. To release the handle we will have to insert the key in it and rotate it towards the inside of the door, just like a sort of hook, and pull towards the outside. Once this has been done, it will be sufficient to first remove the fixed part of the handle and then, paying attention to the connected clamp, remove the movable part as well. This way you will have the handle free and you can replace it or repaint it as you wish. Finally, to reassemble it, simply carry out the operations in reverse order.


Posted on 28 December 2023 by ScegliAuto

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos