Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3 Sportback
    4. : How to replace wiper blades / windscreen wipers on AUDI A3 Sportback.

Audi A3 Sportback - Video tutorial

Model: Audi A3 Sportback MK 2 - Years 2003-2013
Part: Windscreen wipers
Operation: How to replace wiper blades / windscreen wipers on AUDI A3 Sportback.

This video illustrates how to remove the rear wiper and washer fluid sprayer. Also in this case, as in any maintenance operation to be carried out on a car, it is advisable to place the car on a flat surface or on the deck. This, in order to be able to work in conditions of stability and safety. Once this is done, we remove the small cover of the hinge of the rear wiper arm and, then, we remove the nozzle of the washer fluid sprayer. Now, using the suitable wrench, unscrew the bolt that blocks the wiper in the hinge and remove the same. We clean the nozzle of the sprayer, following the indications taken from the images (we clean the holes using wires, electric, copper and, general dirt, gently, using a wire brush).


Posted on 30 December 2023 by ScegliAuto

This video is currently unavailable


Replacement of the air vents of the Audi A3 Sportback
Audi A3 Sportback (2012-2019 / MK 3) We see in this guide the instructions that will allow us to disassemble and replace the air conditioning vents or diffusers of the Audi A3 Sportback.
How to replace the key battery of an Audi A3 Sportback.
Audi A3 Sportback (2012-2019 / MK 3) Replacing the remote control battery of an Audi A3 Sportback is a simple operation; let's see how to do it. We remove the plastic cover placed under
How to install the roof bars on the Audi A3 Sportback
Audi A3 Sportback (2012-2019 / MK 3) Let's see in this short guide, the steps on how to install the roof bars or roof racks on the Audi A3 Sportback, following the instructions below. Fi

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos