Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear parking sensors on Audi A4 B7

Model: Audi A4 B7 - Years 2004-2008
Part: Parking sensors

In today's video tutorial we will see how to remove the parking sensors on an Audi A4 B7, second series. First we open the boot lid and unscrew the fixing screws of the rear lights, in order to remove them from the outside; then disconnect their electrical connectors. At this point we remove the floor and go to identify the parking sensor control unit, which we find on the left; unscrew the screw of the bracket, accessing it from the wheel arch, as shown in the video. Once the control unit has been removed, we can also remove the sensors if desired!

Posted on 8 March 2021 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Audi A4?
Where are the fuses located in the Audi A4?
Audi A4 (2007-2016 / B8) On board the Audi A4, all the fuses will be divided within the appropriate fuse boxes that are installed in the vehicle: in this type of car, it will…
Replacement of the parking brake button of the Audi A4
Replacement of the parking brake button of the Audi A4
Audi A4 (2007-2016 / B8) Today's instructions will allow us to disassemble and replace the parking brake button of the Audi A4. First, let's get inside the car and start disa…
How to replace the rear brake pads with electric brake on the Audi A4
How to replace the rear brake pads with electric brake on the Audi A4
Audi A4 (2007-2016 / B8) We see in this guide the instructions that will allow us to replace the rear brake pads, having the electric parking brake, of the Audi A4, without s…

Other guides you may be interested in

How to Remove the Spark Plugs on an Opel Astra

Want to remove the spark plugs on an Opel Astra? Here's how to proceed: pull the engine bay release lever and lift the front bonnet, securing it. Remove the plastic cover on the soundproofing panel covering the engine (if present), then remove the pins on the coil bar using a screwdriver. Disconnect the coils by hand after unplugging the power connector, then use your socket to unscrew the spark plugs and pull them out of the cylinder head. Take the new spark plugs and guide them into the engine head with the socket extension, tighten them and reconnect the respective power connectors. Finally, close the engine bay.

Watch the video!


by ScegliAuto

More videos