Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the parking brake button of the Audi A4

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Push button

See other generations:
Video tutorial

Today's instructions will allow us to disassemble and replace the parking brake button of the Audi A4. First, let's get inside the car and start disassembling and removing the climate control panel by prying it off the sides and disconnecting the electrical wiring at the back; we remove the cover of the center tunnel to access the parking brake button so that we can remove it, as shown in the video.

At this point, we replace and install the new electric parking brake button, then reassemble all the instrument elements.


Posted on 13 January 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads with Electric Parking Brake on Audi A4
How to Replace the Rear Brake Pads with Electric Parking Brake on Audi A4
Audi A4 (2007-2016 / B8) This guide provides instructions for replacing the rear brake pads with an electric parking brake on the Audi A4 without using a diagnostic tool. Fir…
Removing the Handbrake Lever Cover on Audi A4 B6 - B7
Removing the Handbrake Lever Cover on Audi A4 B6 - B7
Audi A4 (2004-2008 / B7) In today's video, you will see how to remove the parking brake lever on the Audi A4 B7, as well as the B6, in simple and quick steps. First, get in t…
How to Replace the Reverse Switch on an Audi A4
How to Replace the Reverse Switch on an Audi A4
Audi A4 (2000-2004 / B6) How do you replace the brake switch on an Audi A4? Let's see how to change it. Open the inspection compartment at the lower left of the dashboard (re…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos