Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Handbrake Lever Cover on Audi A4 B6 - B7

Model: Audi A4 B7 - Years: 2004, 2005, 2006, 2007, 2008

See other generations:
Video tutorial

In today's video, you will see how to remove the parking brake lever on the Audi A4 B7, as well as the B6, in simple and quick steps. First, get in the vehicle and pull the lever upwards; then remove the plastic cover located under the lever to release the tab, as shown in the video.

At this point, replace the lever cover with the new one; to remove the entire lever, you will need to take off the center console. Finally, reassemble everything by following the reverse procedure!


Updated on 31 May 2026 by ScegliAuto


Related tutorials

Removing the Trunk Lock Cover of the Audi A4
Removing the Trunk Lock Cover of the Audi A4
Audi A4 (2004-2008 / B7) Today, let's go over the instructions for removing and replacing the plastic cover of the trunk lock on the Audi A4. First, open the trunk of the veh…
How to unlock the handbrake of the Audi A4 B8
How to unlock the handbrake of the Audi A4 B8
Audi A4 (2007-2016 / B8) In this video, we will see how to unlock the electronic handbrake of the Audi A4 B8 without connecting the seatbelt and without pressing any pedals. …
How to Remove the Wheel Bolt Cover on the Audi A4
How to Remove the Wheel Bolt Cover on the Audi A4
Audi A4 (2004-2008 / B7) Let's briefly see how to remove the wheel bolt cover or cap so you can take off and replace the wheel if necessary on the Audi A4, as well as on othe…

    Frequently Asked Questions

    • A4 2004-2008 - How much does it cost to change ownership of an Audi A4 1.9 TDI? Read answer

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos