Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the fuel pump / float on Audi A4 B8

Model: Audi A4 B8 - Years 2007-2016
Part: Fuel pump

Let's see in this video how to disassemble the fuel pump or float on an Audi A4 B8, in simple steps. As before, let's remove the rear sofa of our car, lifting it upwards; then remove the cover of the floating pump by unscrewing the fixing screws. At this point we disconnect the electrical connector of our fuel pump and the fuel pipe; then unscrew the ring nut with the appropriate wrench, or by beating with a flat screwdriver, to remove the pump. We just have to replace it with the new one and reassemble everything, applying the reverse procedure!

Posted on 2 May 2021 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the Audi A4 B8 float pump
Disassembly of the Audi A4 B8 float pump
Audi A4 (2007-2016 / B8) In this video tutorial we will see how to disassemble the floating fuel pump of an Audi A4 B8. First we access the back of the car and we go to disas…
How to replace the fuel pump / float on the Audi A4
How to replace the fuel pump / float on the Audi A4
Audi A4 (2007-2016 / B8) Today we will see, in this video tutorial, how to replace the fuel pump or the fuel tank float of the Audi A4. First of all, we access the rear part …
How to replace the fuel pump of the Audi A4.
How to replace the fuel pump of the Audi A4.
Audi A4 (2004-2008 / B7) Today's guide will show us the instructions on how to disassemble and replace the low-pressure fuel pump of the Audi A4, in simple steps. First, we o…

Other guides you may be interested in

    Frequently Asked Questions

    • A4 2007-2016 - Where is the fuel pump relay located in the Audi A4? Read answer

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos