Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Audi
  4. :
  5. A4
  6. : How to replace the windshield washer pump and hoses on the Audi A4.

Audi A4 - Video tutorial

Model: Audi A4 B8 - Years 2007-2016
Part: Pump
Operation: How to replace the windshield washer pump and hoses on the Audi A4.

In this guide, we will discover the main instructions on how to disassemble and replace the windshield washer pump and its pipes of the Audi A4. First, we lift the car and start by removing the left front wheel. Then, we unscrew the fastening screws of the wheel arch, thus gaining access to the windshield washer pump located at the back, as shown in the video. At this point, we disconnect the pipes, removing and replacing the clips as well. We then install the new windshield washer pump, connecting the pipes, and finally, top it off with the new liquid!


Posted on 4 July 2023 by ScegliAuto

    Frequently Asked Questions

    • A4 2007-2016 - What problems does the oil pump in the Audi A4 suffer from? Read Answer
    • A4 2004-2008 - What causes the oil pump problem on Audi A4 2.0 tdi? Read Answer
    • A4 2004-2008 - What oil pump problems on Audi A4? Read Answer
    • A4 2007-2016 - Why is the oil pressure on the Audi A4 2.0 TDI too low? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos