Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the headlights on the Audi A3 8P

Model: Audi A3 8P, MK 2 - Years 2003-2013
Part: Headlight

In this video we will see how to remove the headlights on the Audi A3 8P, in simple and quick steps. First we open the bonnet of our car and start by unscrewing all the fixing screws of the front bumper, which we find both on the top and on the bottom of the car; then unscrew the additional screws on both sides of the wheel arches, as shown in the video. At this point we remove the front bumper and unscrew the fixing screws of the front light; we disconnect the electrical connector of the bulbs to remove the headlight!

Posted on 3 July 2021 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the headlights on the Audi A3 Sedan - A3 Sportback
How to adjust the headlights on the Audi A3 Sedan - A3 Sportback
Audi A3 (2012-2019 / MK 3, 8V) In this short and simple guide we will see the procedure that will allow us to adjust the height of the headlights on the Audi A3 Sedan and Sportback…
How to adjust the headlights in the Audi A3?
How to adjust the headlights in the Audi A3?
Audi A3 (2012-2019 / MK 3, 8V) In this tutorial, we can see how to adjust the headlights in the Audi A3, a very simple and quick operation. First of all, we position the vehicle in…
How to disassemble and replace the front headlights of the Audi A3
How to disassemble and replace the front headlights of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) In this guide, let's see the instructions that will allow us to disassemble and replace the front lights of the Audi A3, by following these simple st…

Other guides you may be interested in

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos