Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Audi A4 B8 gear knob

Model: Audi A4 B6 - Years 2000-2004
Part: Shift knob

In this video tutorial we will see how to remove and replace the gear knob of an Audi A4 B8. First of all, let's get on board the car and first of all unhook the gearshift gaiter, levering the sides; after which we lift it and go to remove, with something sharp, the clamp fixing the cap to our knob. Once done, let's take out our knob, together with the gearshift gaiter, as in the video. We just have to replace it with the new one, inserting it into the headset and then installing them at the same time on the gear lever.

Posted on 6 July 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the gear knob of the Audi A4
How to replace the gear knob of the Audi A4
Audi A4 (2014-2024 / B9) If you want to replace the gear knob of your Audi A4 yourself, which is located inside the cabin, you just need to follow the steps described in the …
How to replace the gear knob of the Audi A4 B8
How to replace the gear knob of the Audi A4 B8
Audi A4 (2007-2016 / B8) In today's article, we will see how to replace the gear knob of the Audi A4 B8. For this operation, no tools or software are needed. To replace the g…
Replacement of the gear shift boot of the Audi A4
Replacement of the gear shift boot of the Audi A4
Audi A4 (1994-2000 / B5) Today's steps will show us how to disassemble and replace the gear shift knob and boot of the Audi A4, following the instructions below. First, we ge…

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos