Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Exterior Mirror of an Audi A6

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Side mirror

In this video tutorial, follow the instructions to remove the exterior mirror of an Audi A6. First, fold the mirror forward and remove the glass by prying it from the sides; then disconnect the electrical connector. Next, unscrew the Torx screws to remove the mirror cover, releasing the tabs inside with a sharp tool. Finally, replace it with the new cover, securing and attaching it properly. Reinstall the mirror glass as shown in the video!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Turn Signal Light in the External Rearview Mirror of an Audi A6
How to Replace the Turn Signal Light in the External Rearview Mirror of an Audi A6
Audi A6 (2011-2018 / C7, MK 4) This guide provides instructions to remove and replace the light and lens of the turn signal in the external rearview mirror of an Audi A6. First, mo…
How to replace the cover of the external rearview mirror of the Audi A6
How to replace the cover of the external rearview mirror of the Audi A6
Audi A6 (2011-2018 / C7, MK 4) Today we will see the steps that will allow us to disassemble and replace the plastic cover of the external rearview mirror of the Audi A6. First of …
How to replace the external rearview mirror of the Audi A6
How to replace the external rearview mirror of the Audi A6
Audi A6 (2018-2026 / C8, MK 5) Today we will see the step-by-step instructions that will allow us to disassemble and replace the external rearview mirror of the Audi A6. First, we …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos