Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide for replacing the timing chain on the Audi Q5 2.0 TFSI

Model: Audi Q5 8R, MK 1 - Years 2008-2017
Part: Timing belt

In today's video tutorial we will see the main instructions that will allow us to disassemble and replace the timing chain on the Audi Q5 first series, with 2.0 TFSI engine. First we open the bonnet of our car and start removing our intake system; we remove the plastic cover that we find above the bumper and unscrew all the fixing screws, as shown in the video. We then disassemble the front bumper and remove the timing cover. We disconnect the V-belt and take all the references necessary for the disassembly and replacement of the chain, following the video to the end!

Posted on 27 August 2021 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the timing chain on the Audi Q5?
How do you replace the timing chain on the Audi Q5?
Audi Q5 (2008-2017 / 8R, MK 1) In order to replace the timing chain on the Audi Q5, you need to go and access the left side of the engine block, where the chain is located: to loca…
How and when to change the timing belt of the Audi Q5 2.0 TDI.
How and when to change the timing belt of the Audi Q5 2.0 TDI.
Audi Q5 (2017-2025 / MK 2, 80A) Today's guide will show us the instructions on how to dismantle and replace the timing belt of the Audi Q5 2.0 TDI; the manufacturer states that on t…
Replacement of the timing belt of the Audi Q5 2.0 TDI
Replacement of the timing belt of the Audi Q5 2.0 TDI
Audi Q5 (2017-2025 / MK 2, 80A) Let's find out in this guide the main steps that will allow us to remove and replace the timing belt of the Audi Q5 2.0 TDI. First of all we open the…

Other guides you may be interested in

    Frequently Asked Questions

    • Q5 2008-2017 - How much does it cost to replace the timing belt on the Audi Q5 2.0 TDI? Read answer

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos