Do it yourself
| ||||
|
Audi A3 - Video tutorial
Model: Audi A3
MK 3, 8V
- Years 2012-2019 In order to remove the rear light of the Audi A3, it is necessary to rotate the rivet located inside the boot and remove the panel that was fixed by the aforementioned rivet. Behind the panel, there will be torx screws which must be loosened and removed using the appropriate wrench. Once these screws have been removed, it will be possible to extract the rear light from its seat and remove it by unhooking its connectors. When the old headlight has been removed, it will be possible to insert the new headlight, connect it to the connector and fix it with the same screws removed previously.
Posted on 28 February 2024 by ScegliAuto
Other guides that may interest you |
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.065
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |