Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the front bulbs on the Audi A5

Model: Audi A5 8T3, 8T8, 8F, 8T - Years 2007-2016
Part: Headlight bulb

When working with the engine off and the handbrake applied, raise the hood and secure it. Remove the protection located above the front bumper by simply unscrewing the fixing bolts. As shown in the video, at this point unscrew the fixed ones that instead hold the same headlight anchored to the seat, and remove the rear attachment of the light itself. Once you have arrived here, remove the light from its seat and place it comfortably on a workbench. At this point it is child's play to get to the affected bulb from the back of the lighthouse. Proceed backwards for assembly.

Posted on 26 October 2021 by ScegliAuto

Video tutorial

Related tutorials

Removal of the front fog lamps of the Audi A5
Removal of the front fog lamps of the Audi A5
Audi A5 (2007-2016 / 8T3, 8T8, 8F, 8T) In today's video tutorial we will see how to remove and replace the front fog light bulbs of the Audi A5, following these simple steps. First we are …
Removing the rear headlight Audi A5
Audi A5 (2007-2016 / 8T3, 8T8, 8F, 8T) In today's video tutorial we will see how to remove the rear light of an Audi A5. First we open the boot lid and remove the side cover covered with c…
Replacement of the rear lights of the Audi A5
Replacement of the rear lights of the Audi A5
Audi A5 (2018-2025 / 8W6) Following these simple instructions, we will see how to disassemble and replace the rear lights of the Audi A5, along with its bulbs. First, we open …

Other guides you may be interested in

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos