Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to repair the glove box of the Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Glove compartment

In this video we can see how it is possible to repair the glove compartment of an Audi A4. If you have noticed in your vehicle that the glovebox is broken, by watching this video you can understand how it can be repaired by following some simple steps. First try to remove the glove box from its seat. Generally the hinges break, so to repair these parts, just insert screws that will keep them fixed in place thanks to the use of an adhesive that you will have to buy from an authorized dealer. Then take a drill with a bit of the same size as the screw you need to insert. Drill the holes, insert the screws. Once you have fixed the hinges with the screws you can take a brush with gray (see video) and color the heads of the screws so that nothing is noticed. Refit the glove box in reverse order.

Posted on 21 November 2021 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Glove Compartment on an Audi A4
How to Remove the Front Glove Compartment on an Audi A4
Audi A4 (2007-2016 / B8) In this video, see how to remove the front glove compartment on an Audi A4. Use a plastic lever to remove the trim on the side of the dashboard. Next…
Removing the glove box Audi A4 B6
Removing the glove box Audi A4 B6
Audi A4 (2000-2004 / B6) In this video we will see the instructions to be able to disassemble the glove box of an Audi A4 B6 and B7. First we get on board the car and go to o…
Removing Glove Compartment on Audi A4
Removing Glove Compartment on Audi A4
Audi A4 (2000-2004 / B6) In this video, let's see how to remove the glove compartment from your Audi A4, sedan or Avant. First, use a screwdriver to pry at the side plastic s…

Other guides you may be interested in

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos