Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Headlight Audi A4 B6

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Headlight

See other generations:
Video tutorial

In today's video, you will learn how to remove the front headlight from an Audi A4 B6 by following these simple instructions. First, open the hood of the car and use a Torx wrench to unscrew all the upper mounting screws of the headlight bracket.

Then, unclip the bumper from the sides by removing the fender clips, and unscrew the additional mounting screws as shown in the video. At this point, you can finally extract the headlight by disconnecting the electrical connector for the bulbs located at the back.

All that’s left is to reassemble everything in reverse order!


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlight of an Audi A4
How to Remove the Front Headlight of an Audi A4
Audi A4 (2004-2008 / B7) Before you can begin, open the hood of your Audi A4. Start by removing the screws that secure the front headlight to the vehicle using a Torx screwdr…
How to Remove the Front Headlight of an Audi A4?
How to Remove the Front Headlight of an Audi A4?
Audi A4 (2004-2008 / B7) Before starting, open the hood of your Audi A4. Begin by removing the screws that secure the front headlight to the vehicle using a Torx screwdriver.…
Remove the Front Headlight on Audi A4
Remove the Front Headlight on Audi A4
Audi A4 (2000-2004 / B6) Removing the front headlight on an Audi A4. Open and lift the hood. Remove the upper screws located above the front headlight. Once all the headlight…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos