Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing Timing Belt on Audi A6 2.0 TDI

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Timing belt

In this video tutorial, you will see the main instructions to help you replace the timing belt on an Audi A6 2.0 TDI. First, open the hood of the vehicle and remove the upper plastic cover and the timing belt cover located on the left (disconnect all the various cables and unscrew the mounting bolts). Next, loosen the tensioner with a wrench and remove the upper pulley to take off the timing belt. The video also shows the replacement of the tensioner along with the timing belt.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the timing belt of the Audi A6 2.0 TDI
Guide to replacing the timing belt of the Audi A6 2.0 TDI
Audi A6 (2011-2018 / C7, MK 4) The following steps will show us how to disassemble and replace the timing belt of the Audi A6 2.0 TDI. First, lift the car and start by disassemblin…
Replacement of the timing belt of the Audi A6 2.0 TDI
Replacement of the timing belt of the Audi A6 2.0 TDI
Audi A6 (2011-2018 / C7, MK 4) Today we will discover the instructions on how to disassemble and replace the timing belt of the Audi A6 2.0 TDI. First, we open the hood of the car …
Guide to Replacing the Timing Belt on the Audi A6 2.0 TDI
Guide to Replacing the Timing Belt on the Audi A6 2.0 TDI
Audi A6 (2011-2018 / C7, MK 4) The main steps outlined in this guide will allow you to remove and replace the timing belt on the Audi A6 2.0 TDI. First, open the hood of the vehicl…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos