Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Stop lights replacement on Audi A4

Model: Audi A4 B9 - Years 2014-2024
Part: Tail light

Open the boot lid and notice that, on the side, there are two small round screw covers. Lift the one relative to the light concerned and unscrew the screw now uncovered. Unlike many other models in which removing the light is a long and tiring job, here this small operation will suffice to detach the light from its seat. Divide the external part of the lighthouse from the innermost one (ie the lamp holder) and unscrew the bulb you intend to replace (in our case it will be the "STOP"). Screw in the new bulb and reassemble everything, obviously proceeding backwards. Good job!

Posted on 3 January 2022 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the third brake light in an Audi A4?
How to disassemble the third brake light in an Audi A4?
Audi A4 (2000-2004 / B6) In this tutorial we can see how to remove the third brake light in the Audi A4, an extremely simple and quick operation. First of all, make sure that…
Replace the stop on Audi A4
Replace the stop on Audi A4
Audi A4 (2000-2004 / B6) Replacing the rear stop on an Audi A4? Quite simple operation, let's see. We open the luggage compartment lid, unscrew the tightening screws on the s…
How to disassemble the third brake light of the Audi A4 B8
How to disassemble the third brake light of the Audi A4 B8
Audi A4 (2007-2016 / B8) In this article we will see how to disassemble the third brake light of the Audi A4 B8, this procedure is useful in case of malfunctions. To disassem…

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos