Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : How to reset the service light of the Audi A3

Audi A3 - Video tutorial

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: -board computer
Operation: How to reset the service light of the Audi A3

In this mini guide of ours we will find out how to permanently eliminate the service warning light from the display of your Audi A3. It is, in fact, a simple reminder that is activated automatically after having traveled a certain number of kilometers and has the function of reminding the motorist of the need to carry out routine maintenance on the vehicle. To be able to reset it manually, the first thing you have to do is obviously turn on the ignition. Then locate the button located below the speedometer and pull it slightly towards you. As soon as the new menu appears on the display, keep it pulled towards you again for five seconds. When finished, release it and turn off the ignition.


Posted on 7 April 2024 by ScegliAuto

    Frequently Asked Questions

    • A3 2012-2019 - What does the TPMS warning light on the Audi A3 indicate? Read Answer
    • A3 2003-2013 - How many liters is the reserve of the Audi A3? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos