Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Audi A3 P8

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

Let's see how to reset the service light on an Audi A3 P8: turn on the instrument panel without starting the engine, then press the small button located on the right side near the rev counter. Pressing it once will display the word "service" or the maintenance interval on the screen.

On the left side of the panel, near the speedometer, there is another button: pull it towards you and hold it for about 5 seconds, then release it. Pull it again (pressing it briefly afterwards). At this point, the service light should be reset.

Turn off the ignition and start the engine to verify.


Posted on 26 March 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on an Audi A3 8V?
How to Reset the Service Light on an Audi A3 8V?
Audi A3 (2012-2019 / 8V, MK 3) To reset the Service light on an Audi A3, turn on the ignition to access the menu that appears on the central display using the buttons on the centre…
How to Reset the "Service" Light on an Audi A3
How to Reset the "Service" Light on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Before you can start, sit in the driver's seat of your Audi A3. Activate the instrument cluster by turning the key in the ignition without starting t…
How to reset the Service light on an Audi A3?
How to reset the Service light on an Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) To reset the Service light on an Audi A3, turn the key in the ignition to access the instrument cluster. Press the button located just below the spee…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos