Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on an Audi A3?

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Service warning light

To reset the Service light on an Audi A3, turn the key in the ignition to access the instrument cluster. Press the button located just below the speedometer, to the right of the small central display on the instrument panel. While holding this button, you can reset both the maintenance intervals and the oil change intervals. Once these intervals have been reset, turn the key to switch off the instrument cluster and check that the light has disappeared upon the next ignition.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on an Audi A3 8V?
How to Reset the Service Light on an Audi A3 8V?
Audi A3 (2012-2019 / 8V, MK 3) To reset the Service light on an Audi A3, turn on the ignition to access the menu that appears on the central display using the buttons on the centre…
How to Reset the Service Light on an Audi A3?
How to Reset the Service Light on an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) The procedure to reset the Service light on an Audi A3 involves turning on the ignition by rotating the key in the ignition switch, then locating the…
How to Reset the Service Light on an Audi A3?
How to Reset the Service Light on an Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) To reset the Service light on an Audi A3, connect a diagnostic tool to the vehicle's OBD port, located just below the steering column. Once the scann…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos