Do it yourself
| ||||
|
Audi A4 - Video tutorial
Model: Audi A4
B6
- Years 2000-2004 Today we will see, in this video, how to remove and replace the rear hatch panel of the Audi A4 Avant, following these simple steps. First of all we open the rear door of the boot and start by unscrewing the fixing screws of the same; we then remove the small tailgate light, disassembling it with the whole ceiling light, as shown in the video. At this point we disconnect the electrical connector of the light bulb and pry the sides to remove the tailgate trim; then we reassemble everything, applying the reverse procedure!
Posted on 12 April 2024 by ScegliAuto
Other guides that may interest you |
Replace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |