Do it yourself
| ||||
|
Audi A3 - Video tutorial
Model: Audi A3
MK 2, 8P
- Years 2003-2013 Today we will see, in this short guide, the main steps that will allow us to disassemble and replace the rear light of the Audi A3. First of all we open the tailgate of the trunk and start by unscrewing the plastic screw that we find behind our headlight; then we pry the sides to remove it, disconnecting the electrical connector of the bulbs, as shown in the video. At this point we are going to replace, if necessary, the bulbs of the rear light, or the whole headlight; then we reassemble the rear light unit again, applying the reverse procedure!
Posted on 17 April 2024 by ScegliAuto
Other guides that may interest you |
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.031
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |