Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Brake Light Bulbs on Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Tail light bulb

Let's see how to remove the rear brake light on the Audi A3 and how to replace the damaged bulbs inside it. Open the boot lid, unscrew the securing screws located at the side of the light with a screwdriver. Disconnect the rear light from its housing once all screws are removed (disconnect the power terminals) and replace the damaged bulbs with new ones (same size and voltage). Once you have replaced all the damaged bulbs, reattach the light with the associated screws and power terminals. Turn on the lights and check the operation.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Third Brake Light Bulbs on the Audi A3
Replacing the Third Brake Light Bulbs on the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) This short and simple guide will show you the main instructions on how to remove and replace the bulbs of the third brake light on the Audi A3. First…
How to Remove the Brake Light Switch on an Audi A3
How to Remove the Brake Light Switch on an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Learn how to remove the brake light switch located under the dashboard cover (left side) of an Audi A3. Unscrew the securing screws of the plastic pa…
How to replace the third brake light on the Audi A3
How to replace the third brake light on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In this new mini guide of ours, we will help you to carry out the replacement of the third brake light of your Audi A3 quickly and correctly. First o…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos