Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : Removing the rear stop on the Audi A3

Audi A3 - Video tutorial

Model: Audi A3 MK 1, 8L - Years 1996-2003
Part: Tail light
Operation: Removing the rear stop on the Audi A3

Let's see the disassembly of the rear light of an Audi A3. We disassemble the various covers to access the rear light, let's see. Lift the tailgate, open the plastic inspection cap (located on the side of the luggage compartment) and unscrew all the screws that block the headlight. We detach the lighthouse from its housing with a lever and disconnect the power supply terminals. After replacing the damaged headlight (with a new one) we mount the new headlight in the sheet metal of the car. We test the correct functioning of the bulbs we have fitted with the new headlight. At the end of the test we tighten all the screws of the rear light.


Posted on 27 December 2023 by ScegliAuto

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos