Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service warning light on Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Service warning light

In this video tutorial we can go and see how to reset the oil maintenance warning light on an Audi A4, model produced from 2007 to 2016. Let's start by turning on the instrument panel but without starting the car, now let's enter in the menu by pressing the "CAR" key as shown in the video. Once this is done we use the wheel to select the item relating to the life of the oil, once in this item we use the wheel again to select the reset of the oil change interval, press the wheel and confirm to execute the '' resetting the maintenance indicator.

Posted on 24 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" indicator on an Audi A4?
How to reset the "Service" indicator on an Audi A4?
Audi A4 (2004-2008 / B7) Good morning, today we will focus on the important procedure of resetting the "Service" light on our Audi A4. Before proceeding, make sure you have p…
How do you reset the Service light on the Audi A4?
Audi A4 (2014-2024 / B9) The Service indicator that is shown on the instrument panel of the Audi A4 can be reset by turning on the instrument panel and navigating through the…
How to restore the service light on the 2008 Audi A4
How to restore the service light on the 2008 Audi A4
Audi A4 (2004-2008 / B7) This article will illustrate the procedure for resetting the service light on a 2008 Audi A4 as the ECU does not detect the service and the light rem…

Other guides you may be interested in

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos