Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore the service light on the 2008 Audi A4

Model: Audi A4 B7 - Years 2004-2008
Part: Service warning light

This article will illustrate the procedure for resetting the service light on a 2008 Audi A4 as the ECU does not detect the service and the light remains on. No tools are needed for this operation. As in other Audi models from the same construction period, to reset the light you must first insert the key, then press and hold the button with the symbol of the English key on the right side of the dashboard after inserting the key, while holding it down start the instrument panel without starting the engine. When the service light appears on the dashboard, release the button with the English key and press the 0.0 button once. Now the light will be reset. We recommend restarting the instrument panel to verify that the procedure has been carried out correctly.

Posted on 2 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" indicator on an Audi A4?
How to reset the "Service" indicator on an Audi A4?
Audi A4 (2004-2008 / B7) Good morning, today we will focus on the important procedure of resetting the "Service" light on our Audi A4. Before proceeding, make sure you have p…
How do you reset the Service light on the Audi A4?
How do you reset the Service light on the Audi A4?
Audi A4 (2007-2016 / B8) The procedure for resetting the Service light on the Audi A4 is done by turning on the instrument panel and navigating to the menu that appears on th…
How do you reset the Service light on the Audi A4?
Audi A4 (2014-2024 / B9) The Service indicator that is shown on the instrument panel of the Audi A4 can be reset by turning on the instrument panel and navigating through the…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos