Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service in the Audi Q2?

Model: Audi Q2 MK 1 - Years 2016-2024
Part: Service warning light

In this tutorial we can see how to reset the service in the Audi Q2, a very simple operation, to be performed only after completing all the scheduled maintenance work. Let's start by inserting the key and turning on the instrument panel, then, using the large knob on the center console, we navigate the menu and enter the "Car" section. Then, press the knob to the left in order to access the maintenance menu, enter "Service & checks" and perform the reset in the "Service intervals" section. Finally, let's go back to the main screen.

Posted on 6 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Audi Q2
How to reset the service light on the Audi Q2
Audi Q2 (2016-2024 / MK 1) Today we will explain how to reset the service light, related to the car service, on an Audi Q2 vehicle independently. To reset the light, we need to…
How to reset the service of the Audi Q2
How to reset the service of the Audi Q2
Audi Q2 (2016-2024 / MK 1) To reset the service of the Audi Q2, the manual specifies that diagnostic equipment must be used. In reality, there is also an empirical method, whic…
How do you reset the Service light of the Audi Q2?
How do you reset the Service light of the Audi Q2?
Audi Q2 (2016-2024 / MK 1) To completely make the Service indicator disappear from the instrument panel of the Audi Q2, you will need to turn on the instrument panel and then p…

How to Remove the Distributor from a Fiat Panda

How to remove the distributor from a Fiat Panda? Lift the bonnet and secure it, then use a screwdriver to unscrew the locking pins of the ventilation pipe, remove the engine soundproofing panel and the cap (detach it). Start by unscrewing the fastening pins of the distributor (as shown in the video); remove the distributor from the engine housing. Install a new distributor inside the engine bay, connect the various cables and close with the cap. Refit all previously removed parts (soundproofing panel, filter, etc.) and test the correct operation.

Watch the video!


by ScegliAuto

More videos