Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Brake Pads on an Audi A4

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Brake pads

See other generations:
Video tutorial

To replace the front brake pads on an Audi A4, first lift the car with a jack so that the corresponding wheel is not in contact with the ground. Then, loosen the bolts that secure the wheel to the hub and remove it to access the components underneath.

By unscrewing the screws that attach the brake caliper to the brake rotor, you can slide out the pads inside and replace them with new replacement parts. Finally, reinstall the caliper and the wheel.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

Audi A4 (2000-2004 / B6) In this video tutorial, you will learn how to replace the rear brake pads on an Audi A4 B6. First, lift the vehicle from the rear using a hydraulic j…
Audi A4 (2007-2016 / B8) This guide provides instructions for replacing the rear brake pads with an electric parking brake on the Audi A4 without using a diagnostic tool. Fir…
Audi A4 (2007-2016 / B8) This guide shows you how to remove and replace the rear brake pads on the Audi A4 in simple and quick steps. First, lift the vehicle and remove the r…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the cooling fan fuse located on the VW Touran?

The fuse for the engine cooling fan on Volkswagen Touran vehicles is located inside the fuse box in the engine bay. The fuse box is specifically mounted near the battery, on the left side of the vehicle. To replace the fuse, open the bonnet and then the cover of the fuse box by releasing the clips. The cover has a diagram of the fuses contained within. The fuse in question is labelled F8 and is 10 Amperes. Remove the fuse and insert the new one, then close the fuse box cover and the bonnet.

Watch the video!


by ScegliAuto

More videos