Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Brake Pads on an Audi A4 B8

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Brake pads

See other generations:
Video tutorial

In this video, see how to replace the rear brake pads on an Audi A4 B8: First, remove the cap from the brake fluid reservoir, then put the parking brake system in service mode. Lift the rear of the vehicle and remove the wheels.

Clean the brake caliper mounting points with a wire brush and WD-40; remove the caliper mounting bolts, then separate the brake pads and remove the bracket, securing it to the brake line. You can remove the brake pads, clean the caliper piston, and push it back using a brake piston return tool; remove the brake pad retaining springs, clean the area well, and then reinstall them.

Install the new pads after treating the surface with anti-squeal paste. Reinstall the caliper, treat the rotor with the appropriate cleaner, and put the wheels back on. Lower the vehicle and replace the brake fluid cap.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

Audi A4 (2007-2016 / B8) This guide shows you how to remove and replace the rear brake pads on the Audi A4 in simple and quick steps. First, lift the vehicle and remove the r…
Audi A4 (2007-2016 / B8) This guide provides instructions for replacing the rear brake pads with an electric parking brake on the Audi A4 without using a diagnostic tool. Fir…
Audi A4 (2004-2008 / B7) In this video tutorial, you will learn how to replace the rear brake pads along with the brake rotors on an Audi A4 Avant. First, lift the vehicle fr…

Other guides you may be interested in

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos