Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the Audi A1 fuse scheme?

Model: Audi A1 MK 1, 8X - Years 2010-2018
Part: Fuse box

In this video we can see the diagrams of the fuse boxes, and their position, in the Audi A1, useful in case we need to check the fuse of a malfunctioning device. As shown, we find a first main box in the driver's side of the engine compartment. The second and third boxes are instead located inside the passenger compartment, behind the side panels of the dashboard. Finally, we can find some additional fuses in the positive pole of the battery, located under the luggage compartment. Remember to always replace a fuse with a spare of the same amperage.

Posted on 14 April 2022 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse diagram for the Audi A1?
Audi A1 (2018-2025 / GB, MK 2) In this video, we can see the fuse layout of the Audi A1 and the location of the various fuse boxes, which can be useful in case we need to check the…
Fuse diagram of the Audi A1
Fuse diagram of the Audi A1
Audi A1 (2018-2025 / GB, MK 2) In the video tutorial below this article, the fuse diagram is shown, with the location of the fuse boxes indicated, and the correct amperage of each …
What is the fuse diagram for the Audi A1?
What is the fuse diagram for the Audi A1?
Audi A1 (2018-2025 / GB, MK 2) If the devices in our Audi A1 suddenly stopped working, the first thing we can do is check the status of the corresponding fuses, whose diagrams are …

Other guides you may be interested in

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos