Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A1
    4. : How to replace the battery in the Audi A1?

Audi A1 - Video tutorial

Model: Audi A1 MK 1, 8X - Years 2010-2018
Part: Battery
Operation: How to replace the battery in the Audi A1?

In this video we can see how to replace the battery of the Audi A1. First of all let's make sure that the key is not inserted, then we lift the hood and open the battery cover. With a 10mm wrench we loosen the nuts of the two poles and disconnect them, starting with the negative one. With a 13mm wrench and an extension we unscrew the bolt of the lower bracket and proceed to remove the old battery. To fit the spare part, simply follow the same procedure but inversely, taking care to connect the positive pole first and only then the negative one.


Posted on 16 July 2022 by ScegliAuto

    Frequently Asked Questions

    • Audi A1 2010-2018 - What is the location of the Audi A1 battery? Read Answer
    • Audi A1 2018-2025 - Where is the Audi A1 battery located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos