Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Audi A1 Remote Key Battery

Model: Audi A1 8X, MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

To replace the battery in the Audi A1 key, start by taking the key. Insert a small flathead screwdriver into the slot at the bottom of the key and lift off the cover. Once the cover is removed, note that the battery to be replaced is a "CR 2032" model, and take it out of the packaging.

Use the small flathead screwdriver to lift the battery inside the remote and remove it. After removing the old battery, take the new battery, remove the child safety seal, and insert it into its slot until it clicks into place. Once the new battery is inserted, close the remote by refitting the cover until you hear it click into place.

Finally, test the new remote battery on the car.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Seat Ibiza?
How to Replace the Remote Battery of the Seat Ibiza?
Audi A1 (2010-2018 / 8X, MK 1) To replace the battery of the Audi A1 remote, press the designated button located on the top of the device to lift the key blade. Once the key blade …
How to Replace the Remote Key Battery in an Audi A1?
Audi A1 (2010-2018 / 8X, MK 1) To replace the remote key battery in an Audi A1, use a thin object as a lever, such as a screwdriver, to lift the cover on the back of the remote, un…
How to Replace the Key Remote Battery on Audi A1-A3 2020
How to Replace the Key Remote Battery on Audi A1-A3 2020
Audi A1 (2010-2018 / 8X, MK 1) In this video, see the instructions for disassembling and replacing the battery of the key remote on a 2020 Audi A1 and A3. First, take the remote in…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos