Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A1
    4. : Where is the OBD port of the Audi A1 located?

Audi A1 - Video tutorial

Model: Audi A1 MK 2, GB - Years 2018-2024
Part: Dashboard
Operation: Where is the OBD port of the Audi A1 located?

If you own a second-generation Audi A1 (year 2018-2023) and want to find out where the OBD port is located in order to connect a professional diagnostic tool to it, you just need to follow these steps. First of all, make sure your Audi A1 is completely turned off, then shift your attention to the bottom part of the dashboard and locate the OBD port you were looking for. Once you have found it, simply connect the diagnostic tool to it using a suitable cable, so that you can identify and fix any errors in the control unit.


Posted on 10 August 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos