Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the Audi A3 heating radiator?

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Heater core

To be able to replace the Audi A3's passenger compartment heating radiator, the glovebox must be opened so that the screws securing it from the inside and outside can be unscrewed. In this way you will have to remove the panel, the carpet under it and the side panel of the footrest compartment on the passenger side: behind this panel you will find the passenger compartment heating radiator, which must be disconnected from the pipes and connectors so that can be extracted from its housing. In this way it will be possible to install a new one, assembling all the parts previously disassembled.

Posted on 27 April 2022 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the Audi A3 heating radiator
Disassembly of the Audi A3 heating radiator
Audi A3 (2012-2019 / 8V, MK 3) Today's main instructions will show us how to disassemble and replace the heater radiator of the Audi A3. First, we get into the cabin and start disa…
How do you replace the heating radiator of the Audi A3?
How do you replace the heating radiator of the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) The replacement of the cabin heating radiator of the Audi A3 is done by opening the glove compartment, unscrewing its internal fixing screws complete…
How to fix the heater radiator on Audi A3
How to fix the heater radiator on Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In this video tutorial we can see how to repair the passenger compartment heating radiator on an Audi A3, when they have clogging problems and theref…

How to Remove the Fuel Pump from a Hyundai IX35

How to remove the fuel pump from a Hyundai IX35. First, disconnect the battery cables, then remove the rear seat from the car. You will find various wiring and a metal piece with screws; that is what you need to dismantle. Undo the screws of the metal cap and remove it. Wrap the entire perimeter of the metal sheet with absorbent paper or cloth, then, with a screwdriver, undo the large bolt around the pump (if present for the model). Disconnect the power connectors and the liquid circulation pipes. Finally, extract the floating fuel pump. To perform the assembly, work in reverse order.

Watch the video!


by ScegliAuto

More videos