Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the ignition lock in the Audi A3?

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Checks and maintenance

In this tutorial we can see how to remove the ignition lock in the Audi A3 8p, a very simple and fast operation. To do this, we will need the wrench and a long, thin tool, such as a small screwdriver or Allen key. First of all we remove the plastic placed on the edge of the cylinder, then insert the key and bring it to the "Start" position. Next, insert the small screwdriver in the indicated hole, located in the upper area, and move it until the internal mechanism is unlocked. At this point, we pull the key outwards and extract the block.

Posted on 7 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the ignition lock on the Audi A3
How to replace the ignition lock on the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) In order to replace the ignition switch on the Audi A3 it is necessary to remove the steering wheel and all the cover with the controls of the light …
How do you replace the ignition lock on the Audi A3?
How do you replace the ignition lock on the Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) The replacement of the Audi A3 ignition lock is carried out by loosening the screws located at the rear of the steering wheel, which once unscrewed w…
How do you reset the Audi A3 service light?
How do you reset the Audi A3 service light?
Audi A3 (2003-2013 / MK 2, 8P) To be able to reset the Audi A3 Service warning light, you need to go and turn on the instrument panel and move within the menu on its display by tur…

How to Replace the Damaged Number Plate Bulb on Fiat 600

In this video, learn how to replace the damaged number plate bulb on a Fiat 600. Use a screwdriver or plastic lever to remove the number plate light unit located in the rear bumper of the car. Once the light unit is removed, extract the lamp holder with your hands, then disconnect the bulb from it. Fit the new bulb/LED (same size and voltage) into the lamp holder, then reassemble the light unit into the bodywork of the tailgate, pressing it until the clips lock automatically. Finally, test the correct operation of the previously installed bulb.

Watch the video!


by ScegliAuto

More videos