Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the instrument cluster from the Audi A3?

Model: Audi A3 MK 1, 8L - Years 1996-2003
Part: Instrument cluster

In order to remove the instrument panel of the Audi A3, it is necessary to remove the plastic cover located in the lower central part of the instrument panel itself. Once this cover has been removed, it will be necessary to loosen the two screws below, in order to free the panel. This can then now be extracted from its housing, loosening the connectors located at the rear. Therefore, the old instrument panel can be replaced with a new one, which will have to be connected to the connectors, fixed with its screws and locked by the plastic cover.

Posted on 12 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on an Audi A3?
How to Reset the Tyre Pressure Warning Light on an Audi A3?
Audi A3 (2012-2019 / MK 3, 8V) To completely clear the tyre pressure warning light displayed on the instrument panel of the Audi A3, first activate the instrument panel. At this po…
How to reset the service light on a 2016 Audi A3
How to reset the service light on a 2016 Audi A3
Audi A3 (2012-2019 / MK 3, 8V) Today we will explain how to reset the 2016 Audi A3 on your own. To reset the warning light, we turn on the instrument panel and the onboard computer…
How do you change the language of the onboard computer in the Audi A3?
How do you change the language of the onboard computer in the Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) It will be possible to change the language of the onboard computer of the Audi A3 by turning on the instrument cluster and inserting the ignition key…

How to Replace the Oil Sump on a Ford Focus

Follow these steps to remove and replace the oil sump on a Ford Focus engine. Lift the car on a column lift and (at your preferred height) use a socket wrench to unscrew the sump plug, allowing the oil to drain into a container (for disposal) and then re-screw the plug. Remove all the side plastics protecting the undercarriage using a battery or manual drill, then unscrew the fastening bolts around the perimeter of the oil sump. After removing the bolts from the sump, detach it from the engine block along with the gasket using a screwdriver as leverage. Clean everything and refit the new part.

Watch the video!


by ScegliAuto

More videos