Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the radiator of the Audi A3 8P (2006)

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Radiator

In today's video tutorial, we will see the main instructions for disassembling and replacing the engine cooling radiator of the Audi A3 8P. First, we lift the vehicle and proceed to remove the hose connected to our radiator, draining the coolant; then we disconnect the electric fan connector, as shown in the video. At this point, we unscrew the upper screws of the radiator, disconnecting the engine air intake; we remove the fan and then extract the radiator, applying the reverse procedure for reassembly!

Posted on 1 August 2022 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the Audi A3 heating radiator
Disassembly of the Audi A3 heating radiator
Audi A3 (2012-2019 / 8V, MK 3) Today's main instructions will show us how to disassemble and replace the heater radiator of the Audi A3. First, we get into the cabin and start disa…
Guide to replacing the cabin heating radiator of the Audi A3.
Guide to replacing the cabin heating radiator of the Audi A3.
Audi A3 (2012-2019 / 8V, MK 3) These short instructions will show us the main steps on how to disassemble and replace the cabin heating radiator of the A3, but also of the A1. Firs…
Where is the cabin heating radiator of the Audi A3 located?
Where is the cabin heating radiator of the Audi A3 located?
Audi A3 (2003-2013 / MK 2, 8P) The cabin heating radiator of an Audi A3 model 8P, produced from 2003 to 2013, is located inside the cabin specifically inside the side dashboard. To…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500X

Learn how to equip your car with universal roof bars. Universal roof bars are used on cars with and without roof rails (fixed bars secured to the car roof). Install the roof bar kit as shown in the video with the bars calibrated according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once the width of the anchoring brackets is adjusted, tighten the bolts with the butterfly nut (if a lock is present) until fully secured to the roof rails. Finally, apply the safety caps on your Fiat.

Watch the video!


by ScegliAuto

More videos