Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the engine coolant radiator in the Audi A4 B8?

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Radiator

See other generations:
Video tutorial

The reasons that require the disassembly of the radiator mentioned above are usually the accumulation of dirt and consequent blockage of the pipes, as well as the radiator itself, or leaks due to the appearance of holes or lesions. For convenience, it is better to make space by removing the bumper, headlights, and front grille, then disconnect the inlet and outlet pipes of the liquid, empty it, remove the thermostat, also called the bulb, and finally unscrew the locking pins, two upper and two lower.

Now we follow the reverse procedure and install the new radiator.


Posted on 24 August 2025 by ScegliAuto


Related tutorials

Coolant Replacement for Audi A4
Coolant Replacement for Audi A4
Audi A4 (2007-2016 / B8) Do you want to replace the coolant in your A4? Here's how to do it. Open and lift the hood, and locate the coolant reservoir. Unscrew the cap of the …
Removing Internal Radiator Hoses
Removing Internal Radiator Hoses
Audi A4 (2000-2004 / B6) The cabin heating uses the heat from the engine's coolant, which passes through the internal radiator (located behind the center tunnel): utilizing t…
How to Replace the Engine Coolant Thermostat on an Audi A4 B7
How to Replace the Engine Coolant Thermostat on an Audi A4 B7
Audi A4 (2004-2008 / B7) This guide shows how to replace the engine coolant thermostat on an Audi A4 B7. The first step is to disconnect the battery. Remove the serpentine be…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos