|
Do it yourself
| |||
| ||||
How to replace the thermostat of the Audi A4
Model: Audi A4
B8
- Years 2007-2016
To replace the thermostat of the Audi A4, we need to open the front hood and unscrew the screw that locks the air tube clamp using a Phillips screwdriver. After removing the clamp, we remove the air tube. Disconnect the water tank by unscrewing the locking screws and disconnecting the cables and connector. Unscrew the flexible coolant tube and remove it by pulling it outwards. Disconnect the alternator connector and remove the multi-socket mounting bracket, release the coolant tube clamp to unscrew the thermostat locking screw. Remove the housing flexible tube and remove the tube mounting bolt. Pull the coolant tube and unscrew the fixing bolts to remove the thermostat housing cover. After removing the thermostat, lubricate the insertion seat and use steel wool to clean the interior. Insert the new thermostat and tighten the housing cover fixing bolts, insert the coolant tube and screw the bolts. Connect the alternator connector and screw the multi-socket mounting bracket on the coolant tube. Connect the tank connector and insert the tank itself into its seat, secure it with screws and mount the air tube.
Posted on 29 August 2025 by ScegliAuto
Video tutorial
Related tutorials
Audi A4
(2007-2016 /
B8)
Do you want to replace the thermostat valve on your Audi A4 and don't know where it is located or how to remove it? Let's see in the following video …
Audi A4
(1994-2000 /
B5)
To replace the thermostat on an Audi A4, lift the vehicle and access the underside to disconnect the radiator hose and completely drain the coolant. …
Audi A4
(2004-2008 /
B7)
Do you want to remove the thermostat from your car and don't know how to proceed? Let's see in the following video how to remove the thermostat from …
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.187
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |