Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A6
    4. : How do you remove the front seat of the Audi A6?

Audi A6 - Video tutorial

Model: Audi A6 C5, MK 2 - Years 1997-2004
Part: Seat
Operation: How do you remove the front seat of the Audi A6?

In order to remove the front seat of the Audi A6 you have to remove the plastic covers that are located at the four corners at the base of the seat. Once these covers have been detached, it will be possible to loosen the bolts located in the areas below so as to be able to lift the seat by accessing its lower part: here you will find the connectors that must be disconnected allowing the seat to be extracted from its own housing. Therefore, it will be possible to insert the new seat, connecting it to the connectors and fixing it with the appropriate bolts.


Posted on 15 August 2022 by ScegliAuto

    Frequently Asked Questions

    • A6 2011-2018 - How do you remove the upholstery of the Audi A6? Read Answer
    • A6 2011-2018 - How to remove the front seats of an Audi A6? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos