Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seats of the Audi A4 B5

Model: Audi A4 B5 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Seat

See other generations:
Video tutorial

This video shows how to remove and replace the front seats of the Audi A4 B5, first generation. First, open the front doors and start by unscrewing the screws securing the guide cover located at the bottom; then use a hex wrench to unscrew all the bolts found on the seat tracks, moving the seat back and forth to uncover them, as illustrated in the video.

At this point, disconnect the various electrical connectors underneath; then remove the seat from the vehicle, applying the reverse procedure for reinstallation!


Updated on 8 June 2026 by ScegliAuto


Related tutorials

Removing Front Seats from Audi A4 B8
Removing Front Seats from Audi A4 B8
Audi A4 (2007-2016 / B8) Let's see how to remove the front seats from your Audi A4 B8. First, slide the front seats all the way forward and remove the plastic covers for the …
How to Remove the Rear Seats of the Audi A4
How to Remove the Rear Seats of the Audi A4
Audi A4 (2000-2004 / B6) Today's instructions will show you how to remove and possibly replace or repair the rear seats of the Audi A4. First, open the rear doors and start u…
How to Remove the Rear Seat of an Audi A4
How to Remove the Rear Seat of an Audi A4
Audi A4 (2004-2008 / B7) Whether you need to install new carpet, new seat covers, install completely new seats, or perform a deep cleaning, you must remove the seats to acces…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos