Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Centre Console on the Audi A3

Model: Audi A3 MK 1, 8L - Years 1996-2003
Part: Dashboard

In this video tutorial, you will see the steps to dismantle the centre console of the first series Audi A3, following the instructions below. First, get inside the vehicle and start by unscrewing the screws on the central tunnel, located on the sides. Then, unscrew the rear screws of the tunnel to remove it, as illustrated in the video. At this point, remove the central air vents and the climate control buttons by unscrewing the screws and disconnecting the various electrical connectors. Remove the central trim and the screws found underneath to dismantle the entire instrumentation!

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How does the disassembly of the central console of the Audi A3 8p take place?
How does the disassembly of the central console of the Audi A3 8p take place?
Audi A3 (2003-2013 / MK 2, 8P) The attached video tutorial could not be a better example of the work mentioned. We are talking about disassembling the central console of the Audi A…
Reset Navigation System Audi A3
Reset Navigation System Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In this video tutorial, you will learn how to reset the navigation system / onboard computer of an Audi A3, as well as other models from the manufact…
How to Replace the Engine Control Unit Fuse on the Audi A3
How to Replace the Engine Control Unit Fuse on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In this brief guide, we will see the instructions to locate and replace the engine control unit fuse on the Audi A3. First, open the bonnet of the ve…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos