Do it yourself
| ||||
|
Audi A4 - Video tutorial
Model: Audi A4
B9
- Years 2014-2023 The nozzle through which to insert the AdBlue additive is located next to the fuel one. To carry out this operation we must therefore open the flap and remove the fuel cap. At this point we can proceed to unscrew the AdBlue tank cap using a cross wrench. Now let's take the tank containing our additive, position it at the top and connect the end of the tube to the tank nozzle. After a sufficient quantity of AdBlue has flown, we can disconnect the hose and reposition the caps on the AdBlue and fuel inlets.
Posted on 28 November 2022 by ScegliAuto
|
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |